From 05 May 2019 to 03 Jun 2019
03 Jun 2019
- 11:57 Feature #2374 (Resolved): Clean Functionality to Import Typical Reflectometry ASCII Formats
- Typically, reflectometry data comes in 2- to 4-column ASCII files:
Column 1: Q vector,
Column 2: R signal,
- 11:48 Feature #2285 (Resolved): Name layers in GUI by their material name
- 11:48 Feature #2285 (Sprint): Name layers in GUI by their material name
- 11:47 Feature #2365 (Resolved): GUI: rename "Import" button to "Data"
29 May 2019
- 16:20 Feature #2373 (Resolved): Remove choice between decoupling approximation and SSCA in GUI layouts
- This choice should be implicit in using a radial paracrystal with strictly positive coupling constant
28 May 2019
- 18:30 Feature #2372 (Sprint): Core: import 2D SANS data
- I put a typical reduced data file in attachment here. Please check if other instruments or data reduction procedures ...
- 18:25 Feature #2372 (Backlog): Core: import 2D SANS data
- There is the need to read a new kind of data file containing 2d SANS data.
The precise format of such a data file i...
- 17:44 Feature #2355 (Backlog): nomenclature: "rectangular" -> "flat detector"
- An effort to address this issue is available here: https://github.com/juanmcloaiza/BornAgain/tree/NewNamingConvention...
- 16:00 Bug #2370 (Resolved): Crash on reflectometry simulation for nonsensible values of theta
27 May 2019
- 16:06 Bug #2370 (Sprint): Crash on reflectometry simulation for nonsensible values of theta
- -The fix was done following a logic already present inside BornAgain: Let users write any value inside the Instrument...
23 May 2019
21 May 2019
- 00:10 Bug #2371 (Rejected): Ctrl+S doesn't work for saving project on win
- File menu entry works as before. It is also still possible to save the project on exit.
20 May 2019
- 18:13 Bug #2370 (Resolved): Crash on reflectometry simulation for nonsensible values of theta
- To reproduce:
1. Instrument view: Choose the Specular Instrument; In the Beam Parameters section --> Inclination A...
- 11:37 Refactoring #2369: rename ThirdParty/Fit/RootMinimizers
- I will take this issue later, may be during the next sprint, meanwhile removing my name. Please give some suggestions...
- 10:08 Feature #2359 (New): Plot x-axis units in Angstroms for Reflectometry
- 10:08 Feature #2358 (New): Save/read reflectometry data/simulation in consistent units
- 09:47 Feature #2311 (Resolved): Provide possibility to load 2D ASCII data for files with .dat extention
- 09:47 Feature #2311 (Sprint): Provide possibility to load 2D ASCII data for files with .dat extention
19 May 2019
- 18:51 Refactoring #2369 (Rejected): rename ThirdParty/Fit/RootMinimizers
- As far as I see, this directory contains minimizer code from Minuit2 and GSL. Minuit2 is part of the ROOT distributio...
17 May 2019
- 15:26 Feature #2368 (Backlog): GUI: Simulation tab: decouple setup editor from action buttons
- The "Simulation" tab currently combines property editors "Data selection", "Simulation Parameters" with action button...
- 14:55 Feature #2367 (Backlog): GUI: Sample builder: "Layers" section incorrectly suggests choice betwee...
- In the GUI sample view, the "Layers" section suggest that "MultiLayer" and "Layer" are the same hierarchical level. T...
- 14:38 Feature #2366 (Backlog): GUI: move Import1D/2D buttons to "File" menu
- Currently, the Import1D/2D buttons reside in the "Data" view (per #2365).
Their functionality, however, does not dep...
- 14:34 Feature #2365 (Resolved): GUI: rename "Import" button to "Data"
- Also change the tooltip.
This button gives access to the "Import 2D" and "Import 1D"
buttons, but also to the imp...
- 14:06 Bug #2348: Example: In python examples, enforce color coding of our choice
- After several discussions, current decision is to do three things:
* Generalize the Python plotting API by passing...
- 14:00 Bug #2364 (Backlog): GUI: feedback on running background job is out of field of vision
- When the GUI response to a user action is delayed,
typically because it requires a long computation,
then the user ...
- 13:52 Bug #2363 (Backlog): Units: GUI overrides user choice - specifically, the detector coordinate unit
- Shortly after I choose detector coordinates in degrees,
the GUI overrode my choice and fell back to millimeters.
- 13:45 Bug #2362 (Rejected): GUI: can neither quit, nor cancel an endless job
- Somehow, I spawned an endless job.
According to top and osview, BornAgain running full power on all my processors....
- 12:31 Refactoring #2361 (Resolved): Use **kwargs in python plotting routines
- refactor plotting to accept and pass **kwargs
15 May 2019
- 18:06 Feature #2294 (Resolved): 3DView: provide button to save image
- 12:28 Feature #2360: 3DView: Provide button to save video
- I have changed priority to low. We can think of many niceties, but some are much more important than the others.
14 May 2019
- 17:19 Feature #2360 (Long Term Idea): 3DView: Provide button to save video
- Follow up of the extra request from Feature 2294, "3DView: Provide button to save image" (http://apps.jcns.fz-juelich...
- 12:08 Feature #2359 (Rejected): Plot x-axis units in Angstroms for Reflectometry
- BornAgain uses nm as default units. The reflectometry community uses Angstroms and their data-files are written in an...
- 12:04 Feature #2358 (Resolved): Save/read reflectometry data/simulation in consistent units
- Currently, the reading/writing of data is inconsistent. Each time data is read-written-read, a factor of 10 or 0.1 is...
- 12:01 Feature #2357 (Sprint): Units: reflectometry units should be angstroms.
- 11:57 Feature #2357 (Backlog): Units: reflectometry units should be angstroms.
- BornAgain uses nm as default units. The reflectometry community uses Angstroms.
In reflectometry, we should by def...
- 11:45 Feature #2352 (Rejected): Provide means to save real-space view as image (or animation?)
- Duplicates #2294, so rejecting. Request for nice-to-have animation added there.
- 11:44 Feature #2294: 3DView: provide button to save image
- Additional request:
Nice to have: create a little animation that shows the sample from rotating perspective.
- 11:02 Bug #2354 (Sprint): Core math: Nontrivial scattering pattern at zero contrast
- Problem is reproducible on my computer.
13 May 2019
- 18:33 Bug #2356 (Backlog): Parameterization: Undefined state in Instrument > Polarization analysis > An...
- In the GUI, it is possible to set a nonzero analyzer efficiency
while the analyzer orientation is still (0,0,0). Thi...
- 16:27 Feature #2355 (Rejected): nomenclature: "rectangular" -> "flat detector"
- For the big renaming release: the correct opposition is "spherical" vs "flat". Rectangular, in there respective coord...
- 16:04 Bug #2354 (Rejected): Core math: Nontrivial scattering pattern at zero contrast
- Tested on my system. Everything works as expected: zero contrast -> zero intensity
- 15:54 Bug #2354 (Rejected): Core math: Nontrivial scattering pattern at zero contrast
- rm -r ~/.config/BornAgain.
Start fresh GUI session.
Sample: drag and drop standard "hexagonal lattice...
- 13:02 Feature #2353 (Backlog): GUI: Add "View" to mainwindow menu bar, and replace right-click menu wit...
- The MainWindow menu bar is currently underused; it only has
"File", "Settings", "Help" entries. Add a "View" entry, ...
- 12:55 Feature #2352 (Rejected): Provide means to save real-space view as image (or animation?)
- There should be a way to save the real-space sample view as an image (jpg).
Nice to have: create a little animatio...
- 12:16 Feature #2351 (Rejected): nomenclature: find better term than "interference" for lattices or corr...
- Sample models describe a structure in real space.
Layers, interface roughness, particle decoration are all real-spac...
- 11:16 Feature #2350 (Backlog): GUI: Material editor: Start without scroll bars, and automatically cente...
- When dragging standard samples into the materials editor,
the top element (the multilayer) is placed under the point...
10 May 2019
- 17:42 Bug #2324 (Sprint): Save to TIFF is broken
- Trying to save a 2d color map in TIFF format does generate a TIFF file, but an empty one.
- 17:31 Bug #2348 (Sprint): Example: In python examples, enforce color coding of our choice
- 14:44 Bug #2348 (Backlog): Example: In python examples, enforce color coding of our choice
- When running examples on my machine, 2D plots use a blue-green-yellow scale, whereas the web site has a rainbow scale...
- 17:19 Feature #2046 (Backlog): Provide defense against running Python script with wrong version of Pyth...
- 16:40 Feature #2046 (Sprint): Provide defense against running Python script with wrong version of Pytho...
- 16:53 Refactoring #2032 (Resolved): Update Examples/Demos for Python3
- No more Python2 print statements found in Examples or Demos.
In commit af3bd40bb, removed all "import future" remnants.
- 14:47 Documentation #2349 (Backlog): Core: instrument: improve example: Beam divergence: use sample wit...
- Show 2 simulation results: with and without beam divergence.
Perhaps even 3 or 4 or 5 results, to show the effects o...
- 08:59 Feature #2319 (Resolved): GUI: import multiple files
09 May 2019
- 17:12 Bug #2347 (Backlog): GUI crashes with masks and 90deg beam inclination
Load bug.pro in attachment
In import view: change units to qspace and back
In instrument view: set back...
- 15:06 Feature #2331 (Resolved): Unit labels
- The pull request containing the feature illustrated by "UnitLabels.png" was accepted. Marking this issue as resolved....
- 11:41 Feature #2346 (Resolved): Enable qspace visualisation for large inclinations
- Added "QXQY" option for spherical and rectangular detectors
08 May 2019
- 16:57 Feature #2331: Unit labels
- In trying to solve issue http://apps.jcns.fz-juelich.de/redmine/issues/2331, I have added units (like this: "[nm]") t...
- 12:05 Feature #2346 (Resolved): Enable qspace visualisation for large inclinations
- When the inclination angle is 90 degrees, qy-qz space doesn't make a lot of sense anymore. So for large angles, it wo...
- 11:06 Testing #2287 (Resolved): Reflectometry cross-validation
- 10:59 Testing #2287: Reflectometry cross-validation
- 1. Simple Ti-Ni simulation comparison amongst different Reflectometry codes, including BornAgain:
07 May 2019
- 17:52 Bug #2151 (Rejected): Import Intensity File - dialog opens behind BornAgain main window.
- This issue has not been reported by anyone but me, it may be a problem in my environment.
- 17:49 Envelope task #2192 (Archived): 1D data import functionality
- 17:47 Testing #2345 (Rejected): Unit test for loading Reflectometry ASCII data
- Pull request #807 needs unit testing
"Clean Functionality to Import Typical Reflectometry ASCII Formats"
- 17:44 Testing #2210 (Resolved): Test 1d data import on known file formats
06 May 2019
- 12:37 Bug #2328 (Rejected): Crashing during GISAS fitting
- Bug was reproduced on one computer only because of hardware malfunctioning
Also available in: Atom